verizon yealink t46g phone manual

The Verizon Yealink T46G is a high-performance IP phone designed for business environments, featuring a 4.3-inch color LCD screen, 12 programmable line keys, dual Gigabit Ethernet ports, HD audio quality, support for up to 16 SIP accounts, integrated Bluetooth and Wi-Fi (optional), and advanced call management features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Advanced Call Features 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 4.3-inch color LCD, Handset, Base Unit, Ethernet Cable, Power Adapter, Quick Start Guide, 12 programmable line keys, 5-way navigation button.

Feature	Description
LCD Screen	4.3-inch TFT color display with 480x272 resolution
Line Keys	12 programmable SIP line/feature keys with dual-color LEDs
Network Ports	Dual Gigabit Ethernet (LAN and PC)
Audio Quality	HD voice with wideband audio support
Wireless	Optional Wi-Fi and Bluetooth modules
Expansion	Supports up to 2 Yealink expansion modules
Headset Port	3.5mm headset jack for hands-free operation
Power Options	Power adapter or IEEE 802.3af PoE
Conference	Built-in 3-party conference capability
Codecs	G.722, G.711, G.729, G.726, iLBC, Opus

Installation

Unpack and inspect contents. Place on stable surface.

Connect to Network: Use Ethernet cable to connect LAN port to router/switch.
Connect PC: Use second Ethernet port to connect to computer if needed.
Power the Phone: Connect power adapter or use PoE from switch.
Connect Handset: Plug handset cord into dedicated port.
Optional Headset: Plug into 3.5mm headset jack.

WARNING! Use only provided power adapter. Ensure proper ventilation around device.

First-Time Setup

Power on phone; follow on-screen prompts.

Network Configuration: Phone will attempt DHCP; check IP address on screen.
Provisioning: Enter provisioning server URL provided by your service provider.
Account Configuration: Enter SIP account details (username, password, server).
Date & Time: Set time zone and NTP server for automatic time sync.
Test Call: Make a test call to verify audio quality and connectivity.

CAUTION! Handle handset and cables gently to avoid damage.

Specifications

Display: 4.3-inch TFT color, 480x272 pixels.
Network: Dual 10/100/1000 Mbps Ethernet, optional Wi-Fi 802.11a/b/g/n.
Protocols: SIP RFC3261, TLS, SRTP, IPv6.
Audio: HD handset and speakerphone, acoustic echo cancellation.
Power: IEEE 802.3af PoE or 12V DC power adapter.
Memory: 128 MB Flash, 256 MB RAM.
Supported Accounts: Up to 16 SIP accounts.
Operating Temp: 0°C to 40°C (32°F to 104°F).
Dimensions: 220mm x 200mm x 65mm (WxDxH).

Controls and Settings

Access menu via navigation button or direct keys. Front Panel: LCD screen, navigation button, volume keys, mute, headset, speakerphone.

Programmable Keys: 12 keys configurable as line keys, speed dial, BLF, or feature keys.

Basic Settings: Language (ENGLISH default), time format, ringtone selection. Network: Static/DHCP, VLAN, QoS. Audio: Volume levels, codec priority, acoustic settings. Account: SIP registration, server settings, authentication. Features: Call forward, DND, auto answer, intercom.

Connecting Devices

Network: Ethernet to LAN port. PC: Ethernet to PC port. Headset: 3.5mm jack. Expansion: Connect Yealink EXP modules via EXP port.

Turn off phone before connecting expansion modules.
Match cables to correct ports (Ethernet, handset, headset).
For Wi-Fi/Bluetooth: Install optional module in expansion slot.

Tip: Use Cat5e or better Ethernet cables for Gigabit performance.

Advanced Call Features

Supports call transfer, conference, hold, park, and more.

Make Call: Lift handset or press speakerphone, dial number.
Answer Call: Lift handset, press speakerphone, or press line key.
Transfer: During call, press TRANSFER, dial target, press TRANSFER again.
Conference: During call, press CONFERENCE, dial second party, press CONFERENCE to merge.
Hold: Press HOLD button; resume by pressing same line key.
Call Park: Park call using feature code; retrieve from any phone.
Speed Dial: Program keys for one-touch dialing.
BLF: Monitor status of colleagues' lines.

WARNING! Do not expose phone to liquids; keep away from heat sources.

Accessibility Features

Visual Alerts: LED indicators for missed calls/messages. Audio: Adjustable ring volume and tone. Screen: Contrast and backlight adjustments. Hearing Aid Compatible: HAC rating for handset.

Care & Cleaning

Unplug before cleaning. Use slightly damp cloth for exterior; dry cloth for screen.

CAUTION! Do not use abrasive cleaners or solvents. Avoid getting moisture into openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian EMI regulations. Ringer Equivalence Number (REN): 0.8B. For support, visit www.verizon.com/support or contact Verizon Business Support at 1-800-922-0204.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power source	Check power adapter connection; try different outlet; verify PoE switch.
No network	Cable/DHCP	Check Ethernet cable; restart router; verify DHCP settings.
No dial tone	Account registration	Check SIP account settings; verify network connectivity; contact provider.
Poor audio quality	Network/Codec	Check network QoS; adjust codec priority; ensure firmware is current.
Screen blank	Backlight settings	Adjust backlight timeout in settings; check for power save mode.

Reset: Press and hold OK key during boot for factory reset.

Service: 1-800-922-0204; www.verizon.com/support